The AFM4211 All-Flex Mower provides excellent cut quality and performance on lush turf grasses on expansive and well manicured areas such as fairways, parks, schoolyards, sports fields, and small estates. The AFM4211 is available with slip-clutch or conventional wing driveline configurations. The mower offers independent deck flotation and zero turning radius due to the sleek frame design. When you need to transport from one mowing site to another the hydraulic wing cylinders will easily lift the wing decks for a 7’-8" transport width. The contour following capability, highly productive 11’ cutting width, and rear discharge design of the floating cutting decks will greatly reduce wide-area cutting times and still deliver finely groomed surfaces at mowing speeds from 2-6 mph.
Counter blade rotation on left hand deck
Spreads grass clippings more evenly. Wing decks throw grass away from the rear deck. Rear deck doesn’t get covered up nor does it get bogged down by cut grass.
7’-8” transport width at lowest cutting height
Meets most city/county codes for transport width.
6” Deck overlap
Eliminates skipping when going into a tight turn.
11’-1” Cutting width – three 48” decks
Sized right for golf courses, cities, schools. Small decks give excellent flexibility.
Sleek frame design, including single beam hitch and compact deck overlap
Design allows operator to make tighter turns without leaving windrows and skips. AFM virtually becomes a zero turn mower. (Oversized tires may not allow this.)
Automatic transport wing locks
When wings are raised in the full transport position, the wings lock in place. No need to get off the tractor to lock. Pull rope from tractor seat to un-lock.
18” Transport tires with tapered roller bearings
Transport tires offer smooth roading and less grass compaction. Allows grass to stand up. Tapered roller bearings offer longevity.
Removable transportation tire spindles
Allows a spindle to be replaced by simply removing two bolts.
Back wheels on side decks even with transportation tires
Allows tighter turns without skips.
Rigid rear side deck tires
Rigid wheel yokes holds hills and slopes better. Safer unit than the competition.
13” Deck tires with sealant
13” Tires offer great flotation, less lbs. per square inch. Sealant minimizes flats.
1/4” Gauge wheel arms
Gives the mower gauge wheel arms a great deal of “hidden” strength.
Low pivot points on deck
The lower the pivot points are to the ground, the more side to side swing, allowing for excellent flotation from each deck.
Deflectors built into mower decks
Safety features meet ANSI standards. Many competitors use chains for protection. Once chains are removed the unit does not meet ANSI specifications.
Even dispersal, discharged items are aimed downward. No rear chains are needed, which tend to clump damp grass.
Rounded front deck edges with no protruding skid shoe
Helps protect trees and other obstacles.
5/16” Front edge & all-welded seams
Provides extra durability.
Cat. 3 Constant velocity main driveline
Constant velocity main driveline allows for tighter turns without harming U-joints in driveline, includes slip clutch.
Guards against premature gearbox failure. Protects mower deck spindles.
Cat. 2 wing drivelines
Reduces start-up torque that is put on the driveline, gearbox and gearbox support.
No paint to scratch off, lighter weight, no rattling or rust.
Heavy gearbox mounts on center and side mower decks
Handles start-up torque better.
Easy to grease blade spindles
No guards to remove for routine greasing of blade spindles.
Middle spindle sits towards the back of the mower deck
Uses less horsepower and allows material to escape the mower deck easier. The discharge of material is more even. Design eliminates windrowing.
Spring loaded idlers
Applies constant tension to belt to run efficiently.
Easy belt tension release
Easily release belt tension for changing belt or for winter storage.
High blade tip speed
Lifts grass up for a clean cut and efficient discharge of material. Tip speed rates are as high or higher than the competition.
Low Lift Blades
Highly recommended in sandy soils where lifting isn’t crucial. Disturbs the soil very little, allowing blades to wear longer.
Medium Lift Blades
Medium suction for lifting grass. Requires less HP than high lift.
High Lift Blades
Greatest suction for lifting grass before cutting. Can take higher HP in tall dense grass. Not recommended in sandy soils.
Perfect for leaf mulching.