Hendrix Machinery, Inc.
(912) 964-7790
1725 Old Dean Forest Road
Pooler, GA 31322



2018 LAND PRIDE AFM4216 at www.hendrixmachinery.com2018 LAND PRIDE AFM4216 at www.hendrixmachinery.com
2018 LAND PRIDE AFM4216 at www.hendrixmachinery.com2018 LAND PRIDE AFM4216 at www.hendrixmachinery.com
2018 LAND PRIDE AFM4216 at www.hendrixmachinery.com2018 LAND PRIDE AFM4216 at www.hendrixmachinery.com
2018 LAND PRIDE AFM4216 at www.hendrixmachinery.com2018 LAND PRIDE AFM4216 at www.hendrixmachinery.com
2018 LAND PRIDE AFM4216 at www.hendrixmachinery.com2018 LAND PRIDE AFM4216 at www.hendrixmachinery.com

For Sale Price:Call


The AFM4216 provides excellent cut quality and performance on lush turf grasses on expansive and well manicured areas such as sports fields, theme parks, fairways, turf farms, and large estates.

Land Pride's AFM4216 offers independent deck flotation and zero turning radius thanks to the sleek frame design. When transporting the AFM4216 from one mowing site to another the hydraulic wing cylinders will easily lift the wing decks for a 8'10" transport width – especially critical on a public streets or rights-of-way. The contour-following capability, highly productive cutting widths, and rear discharge design of the floating decks will greatly reduce wide-area cutting times and still deliver beautifully groomed surfaces at mowing speeds up to 6 mph.

Counter rotation on left hand deck
Spreads grass clippings more evenly. Wing decks throw grass away from the rear deck. Rear deck doesn’t get covered up nor does it get bogged down by cut grass.

Narrow 8'-10" transport width
Not much wider than most tractors, making for safer transport. Meets most city/county codes for transport width.

8" Deck overlap
Eliminates blade skips when turning. Tighter turns can be made. Allows for maximum amount of wing deck flex.

Sleek frame design, including single beam hitch and compact deck overlap
Design allows operator to make tighter turns without leaving windrows and skips. The AFM virtually becomes a zero turn mower.

Automatic transport wing locks
When wings are raised in the full transport position, the wings lock in place, no need to get off the tractor to lock. Pull rope from tractor seat to unlock.

23" Transport tires with tapered bearings
23" Transport tires offer smooth roading and less grass compaction. Allows grass to stand up. Tapered roller bearings offer longevity.

Removable transportation tire spindles
Allows a spindle to be replaced by simply removing two bolts.

Back wheels on side decks even with transportation tires
Allows tighter turns without skips.

Rigid rear side deck tires
Rigid wheel yokes holds hills and slopes better. Safer unit than the competition.

Large deck flotation tires with sealant
Optional 15" tires for great flotation or 18" tires for even greater flotation. The larger the tire the less compaction in pounds per square inch allowing grass to stand up. Sealant in the tires minimizes flats.

1/4" Gauge wheel arms
Gives the mower gauge wheel arms a great deal of “hidden” strength.

Low pivot points on deck
The lower the pivot points are to the ground, the more side to side swing, allowing for excellent flotation from each deck.

Deflectors built into mower decks
Safety features meet ANSI standards. Many competitors use chains for protection. Once chains are removed the unit may not meet ANSI specifications.

Rear discharge
Even dispersal, discharged items are always aimed downward. No rear chains are needed, which tend to clump damp grass.

Cat. 4 CV main driveline
Constant velocity main driveline allows for tighter turns without harming U-joints in driveline, includes slip clutch.

Slip clutch protection
Guards against premature gearbox failure. Protects mower deck spindles.

Cat. 2 wing drivelines
Reduces start-up torque that is put on the driveline, gearbox and gearbox support.

Heavy gearbox mounts on center and side mower decks
Handles start up torque.

Easy to grease blade spindles
No guards to remove for routine greasing of blade spindles.

Middle spindle sits towards the back of the mower deck
Uses less horsepower and allows material to escape the mower deck easier. The discharge of material is more even. Design eliminates windrowing.

Spring loaded idlers
Applies constant tension to belt to run efficiently.

Easy belt tension release
Easily release belt tension for changing belt or for winter storage.

High blade tip speed
Lifts grass up for a clean cut and efficient discharge of material. Tip rates as high or higher than the competition.

Choice of Blade (Low lift standard, Others available thru parts dept.)
Low Lift
Highly recommended in sandy soils where lifting isn’t crucial. Disturbs the soil very little, allowing blades to wear longer.

Medium Lift
Medium suction for lifting grass. Requires less HP than high lift.

High Lift
Greatest suction for lifting grass before cutting. Can take higher HP in tall dense grass. Not recommended in sandy soils.

Perfect for leaf mulching.


Discharge Type
Cutting Width
16’- 8”
Overall Width
16’ -10”
Transport Height
8’ -10”
Transport Width
6’- 8” With Lock Pins Installed
Overall Length
15’-0” Mowing Position | 13’-4” Transport Position
Machine Weight
W/15” tires = 3,315 lbs. | W/18” tires = 3,465 lbs.
Tractor Horsepower
Minimum 40 HP / Maximum 70 HP
Pull Type with Adjustable Clevis and Safety Tow Chain
Tongue Support
2,200 lb. Capacity Screw Jac
Gearbox Support
3/8” Steel Channel
540 RPM (1)-Splitter & (3)-Wing
Gearbox Lubrication
Gear Lube 80-90W EP
Gearbox Oil Capacity
3 - Wings: 3.5 Pints | SD Splitter: 2.125 Pints or OMNI Splitter: 2.5 Pints
Main Driveline (1)
Cat. lV Constant Velocity with Slip Clutch
Deck Drivelines (3)
Cat. II
Cutting Height
3/4" to 5 1/4" (In 1/4” increments)
Deck Size and Quantity
3 each / 72”
Deck Overlap
Deck Thickness
Blade Drive Belt
1 B-Section
Drive Belt Tensioning
Spring Loaded Idler with Overcenter Release
Blade Bearings
Sealed Ball Bearings
Blades Size and Type (3 Each Per Deck)
Low Lift (5/16" x 2 1/2" x 25") | Optional Blades: Medium Lift, High Lift & Mulching
Blade Overlap
1 1/4"
Blade Spindle Speed
2,302 R.P.M.
Blade Tip Speed
18,340 F.P.M.
Deck Tires
10 each, Air tires with Sealant 18 x 9.5 or 15 x 6.6
Deck Wheel Spindles
1 1/4” w/Nylon Bushings
Transport Tires
2 each, 23 x 10.5 with Sealant
Transport Locks
Automatic with Pull Rope Release
Wing Flex
23 Degrees Left To Right | 22 Degrees Front To Back
Center Deck Flex
10 Degrees Left To Right | 22 Degrees Front To Back
Hydraulic Outlets
1 Set Required
Deck Cylinders
Dual Acting
Gauge Wheel Arms
1/4” Wall Square Tubing
Turning Radius
Zero Turning Radius
Mowing Capacity
@ 2 mph = 4.0 Acres Per Hour | @ 4 mph = 8.1 Acres Per Hour | @ 6 mph = 12.1 Acres Per Hour
Hendrix Machinery, Inc. is a dealer of Kubota, Woods, Bush Hog, Princeton Delivery Systems, Alamo Industrial, Brown Manufacturing and Land Pride.