Hendrix Machinery, Inc.
(912) 964-7790
1725 Old Dean Forest Road
Pooler, GA 31322



2018 LAND PRIDE DBM2660 at www.hendrixmachinery.com2018 LAND PRIDE DBM2660 at www.hendrixmachinery.com
2018 LAND PRIDE DBM2660 at www.hendrixmachinery.com2018 LAND PRIDE DBM2660 at www.hendrixmachinery.com

For Sale Price:Call


New from Land Pride, the DB2660 Ditch Bank Rotary Cutter complements our growing line of Rotary Cutters. This new hydraulic-driven cutter boasts a number of features that will make mowing ditch banks, pond dams, or other hard to reach inclines fast, easy, and efficient.

Built for either 540 or 1000 RPM tractors, the DB2660 features a 58" cutting width, 1" cutting diameter, and 32" cutting reach. The 1/2" by 4" blades rotate clockwise at 15,000 fpm, directing debris away from the tractor. Minimum cutting height is dictated by the tractor's 3-pt height.

Tractor HP Range
Designed for 75-150 HP tractor with minimum weight of 7,000 lbs.

Gearbox HP Rating
150 HP

3 Point Design
Does not require a dedicated tractor. Three point hook up is easy to hook up and remove from tractor.

Cutter Deck Visibility
Visibility of the cutter deck is captured from the operator’s seat. Easy to see operation. Operator does not have to look behind.

Factory Assembled
Arrives ready for the customer, saves time and money. (Excluding gauge wheel options and fluids.)

Grease Ports
All grease ports are easily accessible for servicing.

10' Transport Width
Folds up close to the tractor. No weight brackets or decks hanging away from the tractor. Typically, not much wider than the tractor, which means safer transporting.

Extension Arm Design
One cylinder used to adjust extension arm horizontally 32" is easy to operate.

Long Horizontal Reach
Good access for reaching vegetation far away from the tractor.

Above Grade Vertical Reach
Good access for reaching up embankments and cutting low over hanging limbs.

Below Grade Reach
Good access for reaching down embankments.

175 Degree Deck Rotation Angle
Cutter head can be positioned to reach different angles.

Cat. 2 & Cat. 3 with Quick Hitch 540 rpm or 1000 rpm
Fits a wide variety of tractors.

35 Gallon Oil Reservoir
Large reservoir maintains optimum fluid temperatures and also serves as counterweight.

1" Cutting Capacity
Good for trimming brush.

High Blade Tip Speed
15,600 FPM tip speed means cleaner cutting.

One Parking Stand
Easy to adjust 3-point hitch level for unhooking tractor.

In-line Filter
Cleans hydraulic fluid before it re-enters the reservoir.

Shut-off Valve
Permits maintenance with minimum oil loss.

Built-in Auxiliary Weight Rack on Left Side
Suitcase weights can be added to left side for balance. Able to choose the weight bracket to match various types of suitcase weights.

Oil Pressure Gauge
Easily monitor oil pressure for optimum performance of unit.

Pressure Relief Valve
Protects against high hydraulic fluid pressure.

Gauge Wheels Option
Deck floats on gauge wheels eliminating frequent deck positioning and vigilant watch for changes in ground contour under the tractor and/or deck.

SMV Mounting Socket (Standard)
SMV mounting socket receives most SMV signs equipped with a mounting blade for ease of attachment and removal when transporting on a truck or trailer.

SMV Sign (Accessory)
SMV sign is offered as an accessory when the tractor’s SMV sign and mounting blade does not fit the cutter’s standard SMV mounting socket.


Tractor horsepower
75 Minimum hp and 150 maximum hp.
Minimum tractor lift capacity
2,500 lbs
Minimum tractor weight
7,000 lbs without added weights
1,792 lbs (With front & rear chain guards, side gauge wheel, Ditch Bank mounted speed increaser, & Case weight hanger. Without fluid in reservoir)
Hitch type
Cat. ll or Cat. ll/lll Quick Hitch. Clevis style lower hitch.
Tractor PTO speed
1000 rpm
Cutting width
Transport width, minimum
10' - 1" (without gauge wheels)
Overall width (fully retracted with optional weight bracket)
10' - 3 3/4"
Minimum cutting height (Deck level)
2" Minimum | Maximum is dependent upon 3-point lift height.
Horizontal cutting extension
Maximum horizontal reach from center of tractor
Deck rotation
85° up, 95° down
Blade tip speed
15,600 FPM
Number of blades & size
2, 1/2" x 4"
Blade rotation
Blade bolt
1 1/2" With keyway, harden flat washer, and lock nut
3/16" X 21" Round, dish-shaped
Cutting capacity
1" Max.
Deck thickness
10 GA
Side skirt thickness
Speed increaser fluid
80-90W EP Gearlube
Hydraulic fluid
Mobilfluid 424 | For alternate fluids, search on the web for “Mobilfluid 424”
Reservoir capacity and filter
35 Gallons / conventional 10 micron filter
Method to check oil capacity
Hydraulic fluid flow rae
15 GPM (approx.)
Overload protection
Hydraulic relief valve
Driveline (optional)
ASAE category 4
Skid shoes
2 1/2" Wide x 1/4" thick & replaceable
Gauge wheel (optional)
4 x 8 Laminated tire with greasable caged roller bearings.
Gauge wheel adjustment
SMV Sign (Accessory)
SMV decal on galvanized steel back sign and plated or galvanized blade mount.
Hendrix Machinery, Inc. is a dealer of Kubota, Woods, Bush Hog, Princeton Delivery Systems, Alamo Industrial, Brown Manufacturing and Land Pride.