The RC3614 and RCM3614 Series Rotary Cutters provide excellent cutting performance on gently sloping or slightly contoured right of ways, pastures, and set-aside-acres. The 14' cutting width, 2" to 12" cutting height and ability to cut weeds and brush up to 2" in diameter make them well suited for these applications. Both models offer pull-type self-leveling clevis hitches for attachment to 70-160 HP tractors.
The RC3614 and RCM3614 cutters offer Cat. 6 main input drivelines for attachment to 540 rpm or 1000 rpm tractors. They also offer various hitch and tire options making them an excellent choice for agricultural, airport, and municipal mowing applications.
Surpassed rugged industry standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.
Saves customer set-up time and money. Adjustments should always be made by dealer.
7 Year gearbox warranty
Shows confidence in gearbox integrity.
250 hp divider gearbox 130 hp center & wing gearboxes
A rugged heavy-built gearboxes capable of handling heavy-cutting applications.
Gearbox Seal Protection
Gearbox bottom seal protection for longer bearing life.
2" Output gearbox shaft
Large output shaft handles shock loads better.
Input driveline: Cat. 6 CV
Holds up to shock loads and harsh mowing conditions. Constant velocity (CV) U-joint allows for 80 degree turns without doing damage to the driveline.
Easy Greasable drivelines
Drivelines have access holes for greasing the U-joints and to grease the inner profiles.
2 or 4 Plate slip-clutch
Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.
High blade tip speed
Allows clean cutting of material & even distribution. See Specifications for actual fpm.
6" Blade overlap
Eliminates skipping during turns.
Good cutting capacity
Can cut brushy areas with saplings up to 2".
13" Deck height
Handles heavy cutting, which reduces balling-up of cut material under the deck.
10 Ga. stump jumper backed with a 1" x 4 1/2" thick blade mounting bar
Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.
Spindle Nut Protected
Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.
10 gauge smooth deck top
Reduces accumulation of debris and is easier and faster to clean.
1/4" side skirt
Reduces debris piercing possibilities.
Reduces drawbar wear by keeping hitch level while going through ditches.
Hinged wing section
Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.
1" Solid hinge rod
Larger diameter hinge gives greater strength to cutter and hinge area.
Wing transport lock
Holds transport wing in the folded-up position in case of hydraulic pressure loss.
Enclosed front to rear dual leveling rods
Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.
5-Bolt hubs makes the wheel assembly more durable and longer lasting.
Drain holes in wheel rims
Allows water to drain from wheels mounted on the folded-up wing. Helps prevent paint deterioration and rusting to the wheel rims.
Spring-cushioned center axle
Protects unit from bumps and ground shock, cushions loads on drawbar.
Replaceable wheel spindles
Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.
Rephasing lift cylinders
Allows cutter to be leveled using hydraulic cylinders verse mechanical turnbuckles.
7/8" Leveling rods
Large diameter leveling rods provide superior supporting strength over rough terrain.
LP Performance Hitch option
Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.
Bar-tite hitch option
Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.
Roadway light kit option
Allows operator to transport on public roads safer when head lights are turned on and/or when flasher lights are turned on.
Laminated tires: Eliminates flats.
Air-filled tires: Give better cushion while transporting.
Foam-filled tires: Give better cushion while transporting & can’t go flat.
Deck rings (optional)
Keeps blades from damaging the deck.