Hendrix Machinery, Inc.
(912) 964-7790
1725 Old Dean Forest Road
Pooler, GA 31322


2018 LAND PRIDE RC3620

2018 LAND PRIDE RC3620 at www.hendrixmachinery.com2018 LAND PRIDE RC3620 at www.hendrixmachinery.com
2018 LAND PRIDE RC3620 at www.hendrixmachinery.com2018 LAND PRIDE RC3620 at www.hendrixmachinery.com
2018 LAND PRIDE RC3620 at www.hendrixmachinery.com2018 LAND PRIDE RC3620 at www.hendrixmachinery.com
2018 LAND PRIDE RC3620 at www.hendrixmachinery.com2018 LAND PRIDE RC3620 at www.hendrixmachinery.com

For Sale Price:Call


Land Pride's 20-foot RC3620 Series Rotary Cutter is the perfect complement to our full line of folding cutters. This cutter, also available in an “M” model (1000 RPM), is designed for use in wide-open grass mowing applications. With proper care it will provide years of dependable use and features a 7-year limited gearbox warranty.

The RC3620 is the ideal rotary cutter for grassy fields, pastures, waterways, buffer strips, and set-aside acres and handles brush up to 2" in diameter. With tips speeds of 16,000 to 16,500 this unit will make quick and efficient work of the largest jobs. The RC3620 has a long list of features and adds to an impressive line of rotary cutters from Land Pride.

Surpassed rugged industry standards
All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures.

Factory assembled
Saves customer set-up time and money. Adjustments should always be made by dealer.

7 Year gearbox warranty
Shows confidence in gearbox integrity.

250 HP divider gearbox 130 HP center & wing gearboxes
A rugged heavy-built gearboxes capable of handling heavy-cutting applications.

Gearbox Seal Protection
Gearbox bottom seal protection for longer bearing life.

2" Output gearbox shaft
Large output shaft handles shock loads better.

Input driveline: Cat. 6 CV or Cat. 5 Conventional
Holds up to shock loads and harsh mowing conditions.

Easy Greasable drivelines
Drivelines have access holes for greasing the U-joints and to grease the inner profiles.

2 or 4 Plate slip-clutch
Protects drivelines and gearboxes by slipping clutches rather than twisting the driveline when impacts are encountered.

High blade tip speed
Allows clean cutting of material & even distribution. See Specifications for actual FPM.

6" Blade overlap
Eliminates skipping during turns.

Good cutting capacity
Can cut brushy areas with saplings up to 2".

13" Deck height
Handles heavy cutting, which reduces balling-up of cut material under the deck.

10 Ga. stump jumper backed with a 1" x 4 1/2" thick blade mounting bar
Heavy round stump jumper for protecting the gearbox seal and gearbox output shaft. Can hold up to tough conditions.

Spindle Nut Protected
Spindle nut and threads extending beyond the nut are guarded to protect against damage from hitting solid objects.

10 gauge smooth deck top
Reduces accumulation of debris and is easier and faster to clean.

1/4" side skirt
Reduces debris piercing possibilities.

Self-leveling hitch
Reduces drawbar wear by keeping hitch level while going through ditches.

Hinged wing sections
Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches, and hollows can cause uneven cutting.

1" Solid hinge rods
Larger diameter hinge gives greater strength to cutter and hinge area.

Wing transport locks
Holds transport wings in the folded-up position in case of hydraulic pressure loss.

Enclosed front to rear dual leveling rods
Dual leveling rods enable the cutter to pull equally on the rear axle during travel over rough terrain. Many competitors only use one leveling rod.

5-Bolt hubs
5-Bolt hubs makes the wheel assembly more durable and longer lasting.

Drain holes in wheel rims
Allows water to drain from wheels mounted on folded-up wings. Helps prevent paint deterioration and rusting to the wheel rims.

Spring-cushioned center axle
Protects unit from bumps and ground shock, cushions loads on drawbar.

Replaceable wheel spindles
Wheel spindles can be replaced when damaged without replacing the entire axle. Simply remove one bolt to replace damaged spindle.

Rephasing lift cylinders
Allows cutter to be leveled using hydraulic cylinders verse mechanical turnbuckles.

7/8" Leveling rods
Large diameter leveling rods provide superior supporting strength over rough terrain.

Double swivel hitch option
Great for uneven terrain, reduces drawbar wear. Must use spacer washers on drawbar.

LP Performance Hitch option
Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and pivots about the tractor drawbar.

Bar-tite hitch option
Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.

Roadway light kit option
Allows operator to transport on public roads safer when head lights are turned on and/or when flasher lights are turned on.

Wheel options
Laminated tires: Eliminates flats.
Air-filled tires: Give better cushion while transporting.
Foam-filled tires: Give better cushion while transporting & can’t go flat.

Deck rings (optional) Keeps blades from damaging the deck.


Power take-off horsepower
70 to 160 hp
Gearbox Horsepower
250 hp Splitter, 130 hp Center & Wing
Gearbox Oil Capacity
5.18 Pints: Divider Gearbox, 6.76 Pints: Center deck, LH deck & RH deck spindle gearboxes
Gear Box Lubrication
Gear Lube 80-90W EP
Cutting Capacity
Machine Weight
Total Machine - 6,680 lbs. (Front & Rear Single Chain guards, 6 AC tires, CV Driveline, & standard clevis.) Tongue Weight - 1,750 lbs
Blade Tip Speed
16,000 FPM
Hitch Types
Optional Self-Leveling Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Pintle Hitch, or Ball Hitch
Hitch Jack
Standard (7,000 lbs.)
Signal Lights
7 Pin connector
SAE J5560 pin configuration
Cutting Width
20' - 0"
Overall Width
20' - 10"
Minimum Transport Width
9' - 11" (With cutting height at 2")
Overall Length
17' - 6" (With cutting height at 2")
Deck Height
Cutting Height
2" to 12"
Lift Hydraulics Center Deck
3 1/4" x 8" Rephasing hydraulic cylinder with hoses, fittings & stroke control spacers.
Lift Hydraulics Right Wing
3" x 8" Rephasing hydraulic cylinder with hoses & fittings.
Lift Hydraulics Left Wing
2 3/4" x 8" Rephasing hydraulic cylinder with hoses & fittings.
Wing Folding Hydraulics
Two 3" x 12" single-acting hydraulic cylinders complete with hoses & fittings.
Wing Flex
45 degrees up, 20 degrees Down while cutting.
Deck Material
1 - Piece, 10 gauge.
Side Skirt Material
1/4" plate.
Skid Shoes Wing Deck
Reversible & Replaceable: 2 straight skid shoes and 2 AR400 leading skid shoes.
Skid Shoes Center Deck
Replaceable: 2 skid shoes
Six Blades (2 per Carrier)
1/2" x 4" Heat Treated Free Swinging Alloy Steel with up lift.
Blade Overlap
Blade Bolt
Keyed with hardened flat washer & locknut.
Stump Jumper / Blade Holder
10 Gauge round dish shaped pan, reinforced with 1" x 4 1/2" blade mounting bar.
Deck Ring
Optional 3/8" formed and welded.
Front & Rear Guards
Optional single chain or double chain.
Input Driveline
ASAE Cat. 6 with constant velocity u-joint or Cat. 5 with conventional (non-cv) u-joint
Intermediate& Wing Driveline
Cat. 4 with slip-clutch or optional Cat. 5 with slip-clutch
Tire Options
6" x 9 x 21" Laminated tires, 29" x 9" Used aircraft tires without foam filling, 27" x 7.75" Used aircraft tires with foam filling
Number of Wheels
6 - Wheel option: 4 on transport axle and one on each wing axle. 8 - Wheel option: 4 on transport axle and two on each wing axle.
StandardTransport Axle
Spring-cushioned on center transport axle.
Axle Fasteners
1 1/4" Greasable pins
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.
Hendrix Machinery, Inc. is a dealer of Kubota, Woods, Bush Hog, Princeton Delivery Systems, Alamo Industrial, Brown Manufacturing and Land Pride.